PS3 is one of the most amazing devices Sony, but it also has some common problems such as disk read problem. The good news is that most problems can be repaired. In this article you will learn how to fix ps3 disc reading problems. Next comes a lot of great advice about repairing PS3 disc loading problems. Please read on.
When you have trouble reading the PS3, you should first check the game disc you are trying to play. Is there any waste or damage to yourself. Try a different game disc, or DVD movies. If the problem persists, it may be caused by a bad disk driver, if not, it's the PS3 disk problem. Do not be discouraged if your PS3 can not load any PS3 disc or Blu-ray. You must try these tips:
1) Clean your PS3. Sometimes the PS3 disc reading problem is caused by too much dust. May you find your PS3 getting really loud, if it is filled with dirt in it. Need to remove dust from the holes located around the unit. Clean the unit with a vacuum cleaner occasionally.
Remember not to use air-Duster. Because it can blow dust in and around the unit, more critically on Blu-ray laser. This will worsen the situation.
2) Reset the PS3 defaults. First, turn off the PS3, turn it off, and then again after twenty minutes.
3) Format your hard disk. Many people who have a PS3 drive read problem reports after the new firmware update. Probably something in the new update screws up Blu-ray decoder and driver. So, you can reformat the hard disk. However, unfortunately this will cause you to lose all your data unless you back to the flash drive.
4) Send the PS3 back to Sony. I suggest you return it to Sony, if you still have warranty. If you are lucky enough, you May get a new replacement PS3.
5) Follow the PS3 repair manual and fix ps3 disc problem alone. If your warranty is over and the advice above does not work for you, try to find a good repair guide and fix it yourself. With the help of well-written manual, most players will play your favorite games again within 1 or 2 hours.
