Cause # 1 - When you remove the cover of Xbox 360 DVD drive, and exposed to carefully look at the laser module. If it appears to be dusty, and then blow the dust with a small fan. If you decide to use the can of air under pressure, make sure you do not have it on full blast, or you could damage something. You could also use a clean cloth to wipe the laser. But be careful not to touch with his bare hands.
Cause # 2 - If the problem is not dusty laser, then verify that the laser module to the correct starting position. By this I mean that you need to make sure it is in a position that is right under the drive of the game, instead of being in a position that is outside the disk area where there are no data to read. When you read a guide on how to fix xbox 360 open tray error it will no longer be a problem for you.
Cause # 3 - Another feature of the open tray error is that when you try to close the tray, it spits it back and gives you an error on the screen. Another possible cause is that the sensors on the back of the DVD drive may have overheated. Excess heat is bad for the machines and it is causing a good number of failures in many devices. In this case, the tray may be getting kicked out as a way to stop by and continue to play and building a lot more heat which can lead to serious problems for your Xbox 360 console.
the perfect solution for Open Tray Error
From my personal experience, I believe that the most sure-fire way, and most guaranteed method that gives you an in-depth explanations on how to fix Xbox 360's Xbox James Deans fix. Although I found some of the other guides out there that have the same promise, I discovered that they were not in truth delivered to your obećanja.Puno they did not give clear explanations and are not easily understood. Some just assumed that I knew what he meant to speak to their technical and do not go into more detail on some critical steps, so I got stuck and had to seek a better solution.
